|
|
 |
|
|
|
The FNSW-1608PS features non-blocking 3.2Gbps backplane that greatly simplifies the tasks of upgrading your LAN for catering to increase bandwidth demands. For efficient management, the FNSW-1608PS Switch is equipped with remote Web interface and can be programmed for advanced switch management functions such as SNMP Alert Trap, port configuration, port-based / IEEE 802.1Q / MTU VLAN, port mirroring, port trunk, QoS, bandwidth control, broadcast storm control, MAC address / TCP & UDP filter and IGMP Snooping. |
|
|
|
Features |
|
| - Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
- 16-Port 10/100Mbps with 8-Port PoE Web Smart PoE Switch
- 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8)
- Each Switching port supports auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) supported
- Auto-MDI / MDI-X detection on each RJ-45 port
- Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
- High performance Store and Forward architecture, broadcast storm control,runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
- 4K MAC address table, automatic source address learning and ageing
- 2.75Mb embedded memory for packet buffers
- Remote Web interface for Switch management and setup
- SNMP Trap for alarm notification of events
- Broadcast Storm Control support
- Supports up to 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
- Supports up to 2 Trunk groups, each trunk for up to maximum 4 ports with 800Mbps bandwidth
- Supports QoS, bandwidth control and MAC address filter / TCP & UDP filter on each port
- Supports port mirroring function and IGMP Snooping v1 / v2
- PoE power Disable/Enable and PoE power consumption monitoring by management interface
- Firmware upgrade through Web interface
- Password setting, IP setting and device description setting through Planet Smart discovery utility
- 19-inch rack mount size
- Internal full-range power supply suitable for worldwide use
- EMI standards complies with FCC, CE class A
|
|
|
|
|
Specifications |
|
Dimensions: 21" x 8.25" x 3.5" |
|
|
|
