|
|
 |
|
|
|
Red Hawk 24 Slot PowerSense from provides a safe and efficient way to provide power to VoIP Phones, Wireless LAN Access Points, Web Cameras and other LAN Devices without the use of an external power supply for each device. Power is supplied over the existing LAN data cabling system. This greatly improves the range of installation locations for such devices, no longer requiring them to be located near a power outlet. It also adds an unprecedented level of safety and reliability for powered LAN devices. |
|
|
|
Features |
|
| Warranty on the complete unit. | | Hot swappable modules in the 19" rackmount ready chassis | | Each module auto-detects the power requirement and offers transparent 10/100Mb operation | | Each bank is current limited for short circuit protection with power isolation of 1500 VRMS | | Designed and built in Silicon Valley,USA using all metal construction & quality components with 2 year | | Compatibility with IEEE 802.3af. |
|
|
|
|
Specifications |
|
Safety: UL 1950 and cUL
Emissions: FCC Class A EN55022 Class A EN55024, CE Mark (CISPR 22 Class A)
Standards: P802.3af
24 Female RJ-45 Data ports
Shielded jacks for Category 5 or greater UTP (two pair wire) or 100-ohm STP (two pair wire).
Distance: 100 meters
24 Female RJ45 Data+Power on Ethernet (PoE-Power over Ethernet) ports Shielded jacks for Category 5 or greater UTP (two pair wire) or 100-ohm STP (two pair wire).
Distance: 100 meters
LED Indicator/Module Detect/Power Forwarding (blue) Module Power (green)
Electrical: AC Power Input
Input Voltage: 90-264V Autoranging (46Hz - 63Hz)
Connector: 3-pin with Ground
Chassis Grounding: Yes
Power Supply: Single
Electrical: DC Port Power Output
Power Enabling: IEEE: IEEE 802.3af
Power pins: Unused pairs, pins 4,5(+), 7,8(-)
Max. Power/Port: 15.6W
Max Power-all ports active: 24*15.6W = 312W
Operating Temperature: 0 to 40 C ( 32 to 105 F)
Storage Temperature: -10 to 60 C ( 14 to 140 F)
Relative Humidity: 10% to 90% non-condensing
Operating Altitude: -1,000 to 10,000 feet
LED Indicators/Module
LED Indicators/Module Detect/Power Forwarding (Blue)
Module Power (Green) |
|
|
|
