The A400 consists of an A400 REMORA daughterboard mounted on the AFT PCI /PCI Express. The A400 REMORA card has six sockets each which can accept an FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines respectively.
Up to four additional A400 REMORA daughterboards can be mounted in empty slot positions beside the A400 assembly, connected to the A400 by a backplane bus connector. Each 12 port A400 REMORA card is connected by means of a standard 12 line color coded telephone cable terminating at the card in a robust DB25 connector, and ready for hard wiring into a punch block at for the PSTN connection.
Features
More About Sangoma A400/Enhanced Remora 12 port FXO/FXS
Technical specifications
From 2 to 48 ports supported, mixing FXO and FXS interfaces as required.
Support for the Asterisk, Yate, FreeSwitch OPAL PBX/IVR
projects, as well as other Open Source and proprietary
PBX/Switch/IVR/VoIP gateway applications.
Single synchronous PCI interface up to 48 FXO/FXS ports.
Connection by means of a standard 2 line colour coded telephone cable for connection to a punch block.
Dimensions: 2U height form factor: 290mm x 55mm for use in a 2U chassis.
Short 2U compatible mounting clips available for installation in 2U rackmount servers.
32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
Autosense compatibility with 5v and 3.3v PCI busses.
Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper nterrupts sharing.
Intelligent hardware:Downloadable Field Programmable
Gate Array programming with multiple operating modes.
Field upgradeable so that new features related to voice and/or data can be added when they become available.
Power: 800mA peak, operational 300mA max at +3.3v or 5v.
Temperature range: 0 to 50C.
People who shopped for the Sangoma A400/Enhanced Remora 12 port FXO/FXS also shopping for these
