The A200consists of a REMORA daughterboard mounted on the AFT PCI card. The REMORA card has two sockets each of which can accept an FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS ports respectively.
Up to four additional REMORA daughterboards can be mounted in empty slot positions beside the A201 assembly, connected to the A201 by a backplane bus connector.
Features
More About A200/REMORA FXO/FXS Analog Telephony support System
Technical Specifications
From 2 to 24 ports supported, mixing FXO and FXS interfaces as required.
Support for the Asterisk, OPAL PBX/IVR projects, as well as
other Open Source and proprietary PBX/Switch/IVR/VoIP gateway
applications.
Single synchronous PCI interface for all 24 FXO/FXS ports.
Four RJ11 4 ports per REMORA card.
Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
Short 2U compatible mounting clips included for installation in 2U rackmount servers.
32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
Autosense compatibility with 5v and 3.3v PCI busses.
Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupt sharing.
Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes.
Field upgradeable so that new features related to voice and/or data can be added when they become available.
Power: 800mA peak, operational 300mA max at +3.3v or 5v.
Temperature range: 0 to 50C.
Optional DSP card on the A200d
G.168-2002 echo cancellation in hardware
1024 taps/128ms tail per channel on all channel densities
DTMF decoding and tone recognition
Voice quality enhancement: Octasic music protection, acoustic echo control and adaptive noise reduction.
SKU : cy-A200
People who shopped for the A200/REMORA FXO/FXS Analog Telephony support System also shopping for these
